Technical Data:
1.General:
Nominal reed space: 190cm-360cm
Effective reed space: nominal reed space minus 0 to-60cm, above 280cm minus 0-80cm
Weft selection: Two-Eight color pick at will
2.Frame:
Integrated side frames innovatively designed, with high rigidity cross rails and mid-supporters to form ultra-high strength frameworks.
Lower built, heavy duty frame. Main gears run in oil bath.
Loom raise-up by inclined base liner for larger loom beam diameter.
- Driving:
Direct control and positioning stop through electromagnetic brake
Provided with:
One set of rush start motor, 3.0kw, 4p.
One set of V-belt.
One pc of motor pulley.
4.Shedding:
Positive cam shedding , heald frames max. 8pcs. /dobby shedding ,16pcs heald frames.
5.Let-off:
Positive cam shedding
Single warp beam (below 280cm)
positive easing, double back girder.
flange dia. Φ800
- Take-up:
Electronic take-up
Programmable pick density setting through.
Length counter: display of weaving reports, with fixed-length stop function.
Weft Density Range: 25-300 picks per inch(electronic take-up)
Temple: top-mounted type.
Friction roller: rubber
Max. take-up dia.: Φ600mm, cam, dobby, jacquard)
Provided with: 1 pair of temple (top mount)
7.Beating motion:
with 6-link mechanism.
Crank shafts and connecting rods in oil bath built in the main frame on both sides.
- Weft insertion:
2 Weft insertion by two color pick at will.
main and sub nozzles combined system, controlled by electronic solenoid valve unit (SVU)
Sub nozzle timing set and controlled by Twin nozzle valve for air conservation.
With auxiliary main nozzle.
- Weft feeder:
Adopt automatic dividing pick storer to avoid yarn intertwist,suitable for every kind of yarm.
With yarn release sensor.
10.Selvage formation:
Inertwisting system by planetary gear motion
11.Waste weft removal:
By catch cord system on right side only.
12.Cutter:
Mechanical cutter, scissors type.
13.Lubrication:
Oil bath system built in the main frame for main revolution parts.
Oil bath system for the main driving parts, centralized lubrication by manual.
- Weft supply stand
水平落地式4 筒纱。Horizontal type 4 packages. Floor mounting
15.Control box:
Unit built in system by function controlled by printed circuit boards and micro processors.
Large-screen color LCD touch screen and human interface are fixed to display some information such as running status, fault analysis, technological parameters, etc. On the screen, convenient for operation; the usb communication interface is fixed to input various setting parameters into other looms. Weaving guidance system can monitor the working status of looms at any time and be used to set the optimum technological parameters according to loom conditions and fabric technology, further improving the stop mark preventing function of looms and increasing the quality of fabrics.
- Stop motion:
With single lamp of 4 color system for indicating each stopping cause
Warp stop motion: electric contact type, 6-row droppers.
Weft feeler: Photo-electronic type feeler, adjustable to fabric width. 2-head system.
Leno yarn: Electric system with proximity switch
Catch cord yarn:Electric dropper system.
- LAN口 (local area network) port for Ethernet connection.
- Loom installation: By adhesive glue, without foundation bolt.
